| TP5100 Double Single Lithium Battery Charge Management Compatible 2A Rechargeable Lithium Plate 18650 TP5100 4.2V 8.4V | Characteristic cage frequency, FTF:0.47 Hz; Min operating temperature, Tmin:-20 °C; ra max:0.3 mm; Dynamic load, C:5.35 kN; da min:47 mm; Mass:0.04 kg; Max operating temperature, Tmax:120 °C; Nlim (grease):11,000 rpm; Brand:NTN; Fatigue limit load, Cu:0.23 kN; |
| Electronic components SDV1608A5R5C821NPTF | RoHS:6; Bearing Material:[Steel] Steel; Holder Surface Treatment:Not Provided; Type:Bearings with Housin; Seals:DD (Contact Rubber S; Housing Material:304 Stainless Steel; Bearing Retained:No; Number of Bearings:Double; Bearing I.D. d(mm):10; |
| Original LMZ22010TZ/NOPB 10A SIMPLE SWITCHER Power Module with 20V Maximum Input Voltage and Current Sharing | Brand:SNR; Dynamic load, C:95.3 kN; ra max:2 mm; Characteristic rolling element frequency, BSF:5.45 Hz; B:30 mm; rs min:2 mm; Characteristic cage frequency, FTF:0.41 Hz; f0:14.5; Mass:2.18 kg; Radial clearance class:CN; |
| V23086-R1801-A403 relay use for automotive BCM | Low Torque Specification:No; O.D.(Ø):5; d:2; Retainer Type:Punching; Outer Ring:With Outer Ring; Combination symbol:No; Load Direction:Radial; RoHS:6; Precision Grade Symbol:No; Holder Symbol:No; |
| Electric Component VNB28N04 | Characteristic cage frequency, FTF:0.36 Hz; Da max:17 mm; f0:10.5; d1:9 mm; Brand:SNR; d:6 mm; Radial clearance class:CN; Dynamic load, C:2.31 kN; B:6 mm; Nref:33,000 rpm; |
| QZ SW98100E-CDLSR New and Original SW98100E-CDLSR cof LCD driver ic COF/TAB SW98100E-CDLSR | Bearing I.D. d(mm):40; Type:Bearings with Housin; Number of Bearings:Double; Flange O.D. H(φ):114; Width T(mm):50 ～ 120; Bearing Part Number:6008; Shape:Flange Type; Bearing Material:[Steel] Steel; Holder Surface Treatment:Electroless Nickel P; Bearing Retained:No; |
| Electronic Component MJ15003 | d:41.28 mm; r1a max:3.3 mm; Characteristic outer ring frequency, BPF0:7.8 Hz; Characteristic cage frequency, FTF:0.43 Hz; Y2:1.1; Y0:0.6; C:23.02 mm; e:0.55; d1:68.5 mm; Max operating temperature, Tmax:120 °C; |
| 10/100/1000 Base-T Single Port RJ45 Connector---LINK-PP Is The Preferred Supplier Of TI | Static Load Rating (kN):108; d:63.5mm; Seals or Shields:Open Type; SKU:l610549/l610510-timk; Cage Type:Steel; Clearance:Standard; D:94.458mm; Weight:0.45 KGS; Availability:In Stock; B:19.05mm; |
| Rectifier 4A1000V flat KBL410 bridge stack | Weight:0.20 KGS; Availability:In Stock; d:4mm; Seals or Shields:Open Type; SKU:smr104-zen; D:10mm; Cage Type:Steel; B:3mm; Clearance:Standard; |
| (Electronic Components) TIC81591FP | Type:Bearings with Housin; Bearing I.D. d(mm):20; Shape:Flange Type; Bearing Material:[Steel] Steel; Volume Discount:Available; Number of Bearings:Double; RoHS:6; Seals:DD (Contact Rubber S; |
| (original) VNB10N07 | Height H(mm):20 ～ 30; Bearing Retained:Yes (with retaining; Holder Surface Treatment:Black Oxide Coating; Number of Bearings:Single; Seals:DD (Contact Rubber S; Height Indication:Height Selection; Mount Type:Key Groove Type; Shape:T-Shaped; Housing Material:1045 Carbon Steel; |
| (Electronic parts) DS8500-JND+ | d:45 mm; Recommended tightening torque for set screw:8.3 Nm; B:49.2 mm; H:54 mm; L:127 mm; J:95.3 mm; H2:108 mm; Designation of bearing:SUC209; S:19 mm; N:M12; |
| 3D printer controller main board MKS Gen V1.4 compatible with Ramps1.4 Mega2560 R3 support a4988 / DRV8825 / TMC2100 | Temperature Properties:Standard; Surface Treatment:No; Unit Body Material:Cast Iron; B:188; Lubrication method:Oil Supply Type; Unit, Type:Bearing unit; Basic Load Rating, Dynamic Rating(N):32500; Bearing Unit, Type:Diamond Flange Shape; Cover Type:Steel plate single c; |
| Test Platform Cable for Volkswagen Touareg for Phaeton for Bentley KESSY ELV | RoHS:6; Bearing I.D. d(mm):17; Volume Discount:Available; Bearing Used:Deep Groove Ball Bea; Flange Shape:Square Type; Bearing Retained:Yes (with retaining; Number of Bearings:Double; Type:Bearings with Housin; |